|
| |
Diesel Fire Pump Controllers
Joslyn Clark Diesel Fire Pump Controllers are
designed and listed specifically for diesel engine driven fire pump service. Their
controllers meet or exceed all requirements of the National Fire Protection Association
Standard NFPA 20, are listed by Underwriters Laboratories Inc., and approved by the
Factory Mutual System. Fire pump installations are regulated by state and municipal codes,
fire departments, and fire insurance authorities. Please consult with these authorities to
verify your particular requirements.
Standard Equipment:
 | Type 2 Drip-proof, Moisture Resistant,
enclosure with break glass panel.
Enclosure is painted with UL
recognized corrosion resistant red
baked enamel. |
| Voltage Surge Arrester for incoming AC
supply is connected to the line
disconnect switch. This provides an
added degree of component
protection against lightning strikes
for greater reliability. |
| Visual indicators and audible alarms. |
| 2 sets of SPDT contacts for remote
alarms. |
| Battery chargers are solid state, 12
amps current limiting for 225 ampere
hour batteries. |
| Pressure recorder, 7 day wound type. |
| Programable weekly timer to
automatically start and run the
engine for 30 minutes once a week. |
| Safety shutdown cicuit will shutdown
engine on "low oil pressure" and
"engine over temperature". An
alarm will signal this condition. |
| LED's provide easy diagnostics of
engine and controller interaction
as well as charger and battery
conditions. |
Contact The
QuesTeam for more information or literature.
Contact Information
Call the QuestLine, 24 hours a day, 7 days a week for
answers to all of your chemical feed, storage and analysis needs:
Telephone: 281-992-3222
Fax: 281-992-3286
Physical Address: 4425 FM 2351 Friendswood, Texas
Postal Address:
Quest Technologies Inc.
P.O. Box 2177
Friendswood, Texas 77549-2177 U.S.A.
|
