|
| |
Electric Motor Controllers
Joslyn Clark Fire Pump Controllers are
designed and listed specifically for fire pump service. Life safety and fire protection
for buildings and building content is their primary design consideration. Their
controllers meet or exceed all requirements of the National Fire Protection Association
Standard NFPA 20, are listed by Underwriters Laboratories Inc., and approved by the
Factory Mutual System. Fire pump installations are regulated by state and municipal codes,
fire departments, and fire insurance authorities. Please consult with these authorities to
verify your particular requirements.
Standard Equipment and Performance:
 | Type 2 Drip-proof, Enclosure painted
with UL recognized corrosion resistant
red baked enamel. |
| Start and Stop pushbuttons for manual
operation. |
| Automatic start and stop, responsive
to a change in water system pressure. |
| Deluge valve start or remote start from
other fire protection equipment. |
| Emergency start by lifting the
mechanical start lever. |
| Joslyn Clark Controls Locked Rotor
Protector for drive motor protection,
Factory set for horsepower ordered. |
| Contacts for remote alarms. |
| Neutral Grounding Lug. |
| Voltage Surge Arrester for incoming AC
supply is connected to the line
disconnect switch. This provides an
added degree of component
protection against lightning strikes for
greater reliability. |
Contact The
QuesTeam for more information or literature.
Contact Information
Call the QuestLine, 24 hours a day, 7 days a week for
answers to all of your chemical feed, storage and analysis needs:
Telephone: 281-992-3222
Fax: 281-992-3286
Physical Address: 4425 FM 2351 Friendswood, Texas
Postal Address:
Quest Technologies Inc.
P.O. Box 2177
Friendswood, Texas 77549-2177 U.S.A.
|
